Building Kitchen Cabinets - A Tool Checklist For DIY'ers

So you want to build your own kitchen cabinets? You certainly can do it, but make sure you have all the right equipment. This is a quick overview of the tools you will need.

Sander Orbital

Tools You Will Need

Sander Orbital

Circular Saw - Kitchen cabinet casework starts with cutting plywood and panel parts, and you'll need a good circular saw with a plywood cutting blade to accomplish this task. An edge guide will help you make your cuts straight and square. Cutting plywood and panel parts on a table saw is not a good idea, unless you have a table saw set-up with a large outfeed table.

Table Saw - For ripping board stock to make cabinet face frames and cabinet door frames, you'll need an accurate table saw. Many good bench top table saws will be suitable for this process.

Miter Saw - For cutting board stock to length, a good miter saw is required. Cutting board stock to length includes cutting cabinet face frames, cabinet door frames, and all moldings.

Random Orbital Sander - For finishing all casework and board stock, you'll need a random orbital sander with a variety of sandpaper grits.

Cordless Drill - Kitchen cabinets can be assembled using screws. A good 18 volt cordless drill with a backup battery will make your cabinet assembly go smoothly. Please get an extra battery so that you won't lose time waiting for batteries to recharge.

Kreg Jig - The kreg jig offers a system to assemble cabinet face frames with pocket screws. All major cabinet companies build their cabinet face frames with pocket screws - so should you. There is no need to build mortise and tenon joints on your face frames.

Nail Gun - Cabinet installation requires a nail gun for attaching all moldings on your kitchen cabinets.

Some Tools You May Need

Planer - If you decide to mill your own board stock, you'll want to have a planer. This makes sense if you decide to use board stock not commonly available at the home centers - like cherry and alder.

Sprayer - For finishing cabinet doors and face frames, an hvlp sprayer can make staining and finishing a faster process.

Miscellaneous Jigs - If you're using European hinges on your cabinets (cup hole hinges), you'll want a good hinge hole jig. Also, attaching drawer slides inside cabinet casework goes a bit more smoothly with the help of a drawer guide jig.

Building your own kitchen cabinets is a big project. It's a project that most DIY'ers can tackle, but you'll want to have all the right tools to make the project easy to manage and complete. Please consider these tools before you get started.

Building Kitchen Cabinets - A Tool Checklist For DIY'ers
Sander Orbital

Cyber Monday Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch 2011 Deals

Dec 06, 2011 09:41:43

Cyber Monday Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch Deals
Click for larger image and other views

Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch

>> Click here to update Cyber Monday prices for Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch <<

Cyber Monday Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch Feature

  • Optional vacuum conversion kits are available to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool
  • Floating rotor utilizes five blades, producing more usable power. Less air is used more efficiently to maintain maximum power
  • Comfort Platform provides additional hand and wrist support. Also offers increased protection against cold air exhaust
  • Throttle lever recesses into housing grip when depressed, eliminating pressure-point on operator's palm
  • Speed Control allows thumb-control regulating of tool speed. Lighter air-motor assembly, ideal for vertical and overhead sanding applications


Cyber Monday Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch Overview

25 hp., ergo-palm style grip, 12,000 RPM, 3/16" dia. orbit, with rear exhaust sander. Less weight only 1.4 lbs. Lower profile only 3-1/2" hig. Made in USA! Anti-clog vacuum design with a replaceable drop-in motor. New I.D. markings. Color coded composite lever (identifies orbit size), low sound levels and a one-piece speed control dial. Custom engineered composite cylinder with a double row balancer bearing that keeps out contaminants. Includes low profile premium urethane, weight-mated, non-vac pad (PN56106). Can be converted easily to self-generated or central vac model for hook-up to dust collection system.



SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch

Limited Offer Today!! Dynabrade 59020 Dynorbital-Spirit Non-Vacuum Random Orbital Sander, 5-Inch Cyber Monday and Black Friday 2011 Deals

Oil-free Pancake Compressor Flash Drives 16Gb

Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit

Cyber Monday Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit 2011 Deals

Dec 05, 2011 12:23:30

Cyber Monday Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit Deals
Click for larger image and other views

Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit

>> Click here to update Cyber Monday prices for Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit <<

Cyber Monday Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit Feature

  • Optional vacuum conversion kits are available to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool
  • Floating rotor utilizes five blades, producing more usable power. Less air is used more efficiently to maintain maximum power
  • Comfort Platform provides additional hand and wrist support. Also offers increased protection against cold air exhaust
  • Throttle lever recesses into housing grip when depressed, eliminating pressure-point on operators palm
  • Speed Control allows thumb-control regulating of tool speed. Lighter air-motor assembly, ideal for vertical and overhead sanding applications


Cyber Monday Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit Overview

  • Low profile design with ergonomic grip
  • Color-coded levers identify orbit size
  • Less weight, more power - 12,000 RPM
  • Three orbit diameters to choose from 6" 3/16" Diameter Orbit - Grey Lever - for general sanding
  • Low-profile, premium urethane, weight-mated 6" sanding pad included with the tool
Applications include sanding, color sanding, featheredging, scuffing, finishing and blending.  .25 HP motor with a 2 cfm - 14 scfm average air consumption.



SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit

Limited Offer Today!! Dynabrade 21035 6-Inch (152 mm) Diameter Non-Vacuum Dynorbital-Spirit Random Orbital Sander, 12000 RPM, 3/16-Inch 5 mm Diameter Orbit Cyber Monday and Black Friday 2011 Deals

82 Mitsubishi Dlp Wireless Home Speaker Samsung 32 Inch 1080P

Refinishing Hardwood Floors - Sanding

Refinishing a hardwood floor is an easy way to add beauty and value to any home. It can also be a real ego boost for the do it yourselfer. Doing it yourself will save you money if you follow these easy steps.

Sander Orbital

The most important factor to consider when refinishing is a hardwood floor is cleanliness. You want to make sure the floor is free from any debris. Debris can get caught in the sander and damage the floor. Small jagged stones are the most damaging. Sometimes it isn't possible to see the damage until after you apply your finish coats, and then it's too late.

Sander Orbital

The baseboards are also another factor you must consider. If you are confident with your skills, you can gently remove them with a small flat-bar and a hammer. Take your time. The idea is to remove and replace, not remove and then drive to the hardware store because you broke the boards. You can leave the baseboards in place if it isn't practical to remove them. If you choose to leave the baseboards, I recommend that you protect them with painters tape. The power sander will damage them if you are not careful.

When the floor is clean, and the baseboards have been removed or protected sufficiently, you can begin to sand. I recommend renting an orbital sander with a rectangular face. (Be careful when transporting it to and from your home and make sure you have someone help when lifting the sander.) Start with 80 grit sand paper. Guide the sander smoothly over the floor. Make sure you are sanding parallel with the joints in the floor. Try not to sand perpendicular to the joints, as this type of sanding can damage the wood and cause the finish to look less than perfect. The number of passes it takes to remove the old finish will differ from floor to floor. Be deliberate. Remove all the old finish before you move to a smaller girt sand paper.

Now that you are done sanding with the 80 grit sand paper, you will want to sweep or vacuum the floor. This removes any large wood particles or debris that may have been dislodged. Once cleaned, sand the floor in exactly the same fashion using 120 grit sand paper. You will notice the 120 grit sand paper sands very efficiently. This is because you are no longer sanding through the old finish and the sand paper is directly on the face of the wood. Try to be smooth and fluid as you move the sander. If you pause or stop, you will over sand and create low spots in the floor.

You will know when the sanding is complete by the look and feel of the floor. Visually you will not see any shinny or glossy areas. The floor will have a smooth and dry feel to it. Take you time to crawl around and closely inspect the floor. If you find any areas that do not meet your standards, carefully sand them again. As you sand over the imperfections, be sure that you do not hold the sander in one place for a prolonged period of time. Instead, make passes over the area needing to be sanded; short ones first, followed by progressively longer ones. This technique is called feathering and will help prevent over sanding your floor in any one area.

After your final inspection of the floor is complete, you will want to clean again. Deliberately vacuum or sweep up all the debris. Then, using a slightly damp cotton towel, wipe over the entire floor surface. When you are wiping, keep the towel in one orientation against the floor. Do not pick it up. The goal is to capture any small debris left behind on the front face of the towel. You will notice that the floor wicks some of the water out of the towel. This is normal and will not affect your final finish as long as you allow it to dry.

In conclusion, refinishing a hardwood floor does not have to be difficult. Remember to clean the floor before you start to sand. Clean the floor whenever you change the girt size of the sand paper you are using. When complete, you will have a smooth floor ready to accept its first coat of finish.

Refinishing Hardwood Floors - Sanding
Sander Orbital

Cyber Monday Black & Decker MS2000 Multi Sander with Smart Select 2011 Deals

Dec 04, 2011 12:53:38

Cyber Monday Black & Decker MS2000 Multi Sander with Smart Select Deals
Click for larger image and other views

Black & Decker MS2000 Multi Sander with Smart Select

>> Click here to update Cyber Monday prices for Black & Decker MS2000 Multi Sander with Smart Select <<

Cyber Monday Black & Decker MS2000 Multi Sander with Smart Select Feature

  • Smart Select Technology - choose your application, snap on recommended base and sander adjusts for optimal speed
  • 4-in-1 sander provides maximum versatility for a wide range of sanding applications
  • Tool-free base changes makes it easy to snap on and off different bases in seconds
  • Translucent hard body canister with pleated filter
  • Hook and loop sandpaper system for fast and easy paper changes


Cyber Monday Black & Decker MS2000 Multi Sander with Smart Select Overview

Includes Complete 4-in-1 Sander Kit - MS2000, (2) Interchangeable Sanding Bases, Finger Detail Attachment, Assorted Sheets of Sandpaper, Storage Bag

Cyber Monday Black & Decker MS2000 Multi Sander with Smart Select Specifications

The Black & Decker MS2000 Smart Select Sanding Kit takes all the guesswork out of sanding projects. This all-in-one random orbit, 1/4-sheet, detail, and finish sander guides your work and self adjusts, so you'll get high-quality results every time you use it. Straightforward and easy to operate, the MS2000 is ideal for home improvement enthusiasts and hobbyists who want a tool that's ready to go right out of the box.


The MS2000 Smart Select Sanding Kit
At a Glance:
  • 4-in-1 sander: random orbit, 1/4-sheet, detail, and finish
  • SmartSelect technology
  • Tool-free base change
  • Includes 2 interchangeable sanding bases, finger detail attachment, storage bag, and more
  • 2-year warranty

SmartSelect dial adjusts speed for 4 different applications. View larger.

Swap sanding bases with the touch of a button. View larger.
Smart Select Technology for Optimal Performance
It's not always easy to match the right sanding materials to the job, or to know which speed is best for the application. That's why the MS2000 features Smart Select technology, which does most of the thinking for you.

Just dial in your application with the illustrated Smart Select knob at the front of the tool: the sander will recommend a base and automatically adjust to the appropriate speed. The bases are color-coded to match the images on the knob, so selecting the right base for the job is as easy as can be.

Three Interchangeable Bases for Versatility
To make sure you get the most bang for your buck, the MS2000 is a complete sanding kit that includes three sanding bases: random orbit, detail sanding, and finish sanding. These interchangeable bases allow you to tackle a range of jobs, everything from sanding intricate detail work to doors, furniture, and floors.

To swap bases, simply press the MS2000's release button and attach a new base--no tools required!

Comfortable and Built to Last
The MS2000 has numerous features that were designed for comfort and reliability. To start, the sander features an ergonomic design with multiple grips (palm, rear-handle, and two-handed) to give you complete control.

For durability, the MS2000 has a dust-sealed rubber on/off switch and an easy-empty dust canister with filter to keep debris away from the tool's components.

The MS2000 is backed by a two-year warranty.

What's in the Box
Sander; one random-orbit sanding base; one flush/finish sanding base; one detail attachment; one accessory storage bag; and assorted sandpapers.




SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday Black & Decker MS2000 Multi Sander with Smart Select ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Black & Decker MS2000 Multi Sander with Smart Select

Limited Offer Today!! Black & Decker MS2000 Multi Sander with Smart Select Cyber Monday and Black Friday 2011 Deals

42 Inch Lcd

Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad

Cyber Monday Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad 2011 Deals

Dec 03, 2011 15:38:42

Cyber Monday Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad Deals
Click for larger image and other views

Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad

>> Click here to update Cyber Monday prices for Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad <<

Cyber Monday Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad Feature

  • Powerful .21 horsepower motor for tough jobs without stalling
  • Weights only 1.59 lbs- lightest in the industry
  • Teardrop handle for great control
  • Low vibration
  • Easy access speed control


Cyber Monday Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad Overview

This Chicago Pneumatic random orbital sander is great for surface preparation from body filler to paint primer. Speed (RPM): 12,000, Random Orbital: Yes



SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad

Limited Offer Today!! Chicago Pneumatic CP7255 Random Orbital Sander- 3/16 Orbit- 6-Inch Pad Cyber Monday and Black Friday 2011 Deals

Sorround Sound Speakers 50 Hdtv Lcd

How to Build Your Own Boat

STUDY NOTES FOR 12' 16' & 19' DOLPHIN BOATS

Sander Orbital

Important information on building your own boat!

Sander Orbital

From time to time I've been asked the question "I'd love to own a small boat, is it hard to build one?" It's really surprising the looks of doubt when I answer, "No, no, no! If you know what to do and you're willing to invest a little time you can do it easily!" The next questions that usually follow are "How much time?" and "How much will it cost?" Well, generally speaking, that really is the "How long is a piece of string question!" and it can vary quite a bit.

People differ of course, and what may take two or three weekends for one may painstakingly for others, take a couple of months. The short answer is, "It depends how fast you work, but two or three weekends should be average at a rough guess." In 1998 the Wooden Boat Association chose a Dolphin 16 to construct at the 'Down by the River Festival' at Brisbane. In spite of several cases of VB's the boys managed to build a 16' Dolphin (non sailing version) in two afternoons and present it to a lucky prizewinner.

HOW MUCH?

Once again, quite tricky, some folks will splash out on camel hair paintbrushes and six pairs of throwaway overalls and new gloves... already they've spent thirty odd dollars more than the next chap who still has his fist wrapped around his dollars. For the average homebuilder they should be able to construct this boat for approximately 0.00 to 00.00, if they don't take into account their own time. Thirty to forty hours labour should be sufficient to complete this project to a reasonable standard. Remember, cost for materials vary greatly all over the country and this must be taken into consideration!

WHAT SORT OF BOAT IS THIS?

The DOLPHIN 12

Firstly, it's a simple composite epoxy and glass ply boat, just under twelve feet by six feet in beam, big enough for a couple of adults and a motor roughly up to five to seven hp. It's stable, open, has a couple of seats and will take inshore waters in its stride. I prefer to think of it as an open family/fishing craft that can be used in rivers, estuaries and lakes.

The DOLPHIN 16...POWER AND SAILING VERSIONS

This is basically the same as the 12 but is made of 4.5 sheets of 6mm ply and is strengthened more for the sailing version by way of extra glass in the chainplate areas and longitudinal stringers for the floors. There are three rigs to choose from. The 'Batwing Gunter Rig', the 'Balanced Lug Sail' or the 'Standing Lug Rig'. See diagrams. In addition, the sailing version has a 10' x 10" keel that is ballasted by the inclusion of two 35 kilo lead ingots glassed into the keel during construction. Also, there is a rudder constructed of Oregon, coated in glass. Please note that a simpler plywood and glass version can also be built if required. The mast is a solid Oregon piece 12' with an 8' spar for the standing lug rig version.

THE DOLPHIN 19 KETCH

The 19 foot Ketch is the latest addition to the fleet. She also is a frameless boat, an extended Dolphin 16 with a couple of additions. The dimensions are 19 foot by six foot beam and she has a 20 inch freeboard but this can be extended to 22 inches at the expense of the sheer line curve. There is a 5 foot foredeck that leads back to the main mast. This mast is situated immediately behind the bulkhead that the deck itself sits on. There is ample storage under this deck for extra flotation or gear storage as required. Entrance to this area is through the cutout in the bulkhead.

The craft has the choice of two keel configurations, an eighteen inch keel or a twelve inch keel depth that runs approx. two thirds along the boat's length. This is constructed from solid Oregon and provides the strong backbone needed for the frameless design. There is also provision for twin bilge keels that allow easy beaching and use of a slightly more shallow keel, around 9/10 inches. Ballast for the boat is four lead ingots that are built into the keel itself and is approximately 150 lbs in weight. It is envisaged that the boat, ballasted, should be in the area of some 450 lbs (210 kgs) unloaded.

The rig is a twin mast Ketch configuration with a jib area of 19 square feet, the mainsail, 56.5 sq. feet and the mizzen mast, 24 sq. feet in area. This is approx 100 sq. feet total sail area. The rig is a standing lug, boomless with a top spar approximately eight feet long. A gaff rig is also possible for this boat, in fact the first Dolphin 19 customer in South Australia has opted for this rig. The craft is designed to sail with jib and mizzen alone and should provide much more room aboard in this configuration. For any prolonged jib/mizzen configuration a slightly larger jib area would provide better sail balance and power.

The twin masts are either clear Oregon or clear spruce but the spruce alternative would be fairly expensive! They are planed round from four inch square stock and are quick to make if an electric planer is used. They are soaked in epoxy and then finished in anti ultra violet varnish to prevent 'milking' of the epoxy. An unusual feature of this design is the twin galvanized wire stays on each mast. This gives a traditional look but also adds a significant safety factor. The solid Oregon chain plates, placed outboard of the hull provide an attractive old fashioned classic look to this very versatile little sailing craft.

As with all the Dolphin range the hull is beamy and commences with a vee sectioned bow that falls away to a flatter 7 degree hull bottom to provide plenty of beam stability. There is no floor in this design but that is not to say that one could not be easily added if required. The primary reason for not including a floor in the original design was for access to the bilge area for cleaning and to prevent water lying in the boat unseen, a primary cause of damage in boats left unattended for a while.

The boat is designed to take an outboard engine (10-12 hp approx) that could be attached to the transom with an outboard bracket but it is possible to fit an inboard if required. This necessitates the addition of engine beds and a floor and was omitted really because of the extra time and labour required to install.

This craft was designed with intention to provide a versatile easy to build 'proper little boat' for the owner that would like a boat that is a 'no fuss' design that can be built using very simple, easy build techniques that really do away with excess build times. There is nothing more frustrating than hacking way for weeks building complicated frames that must interlock with sophisticated "mortise and tenon joints" and the like, requiring quite advanced woodworking skills that are generally just a bit beyond the average D.I.Y. chap. If you can use a jig saw, tape measure and a sanding machine and mix up epoxy glue, the Dolphin 19 will be an easy project for you. Don't forget that we are only a phone call away and pride ourselves in our after sales 'help line' that is available for advice and help anytime during normal hours!!

The Dolphin 19, with its simple, two page A1 plan and instruction book does away with the need for tiresome lofting and calculations normally required. It really is more like a simple case of 'join the dots' building that the Dolphins are becoming well known for. A hundred and fifty owners can't all be wrong!!

WHAT SORT OF CONSTRUCTION IS IT?

Basically, the 12 footer is built from three sheets and a half sheets of 1220 x 2440 6mm plywood and the 16 footer from four and a half sheets of 1220 x 2440 6mm plywood and the 19 foot Ketch, six sheets of 1220 x 2440. They are built using a simple 'stitch and glue' method using epoxy resin glue thickened with Q-Cells or Microspheres and then layered on the outside with a strong layer of 300 gm biaxial glass cloth and epoxy resin. The instructions contained in the plan fully detail to the last degree every technique that will be needed to build these boats. The plans, known as the 'easybuild' method requires no complicated lofting but a very simple 'join the dots' method that can be drawn directly onto the ply. For example, the whole boat (a 12) can be drawn up in one afternoon and all the shapes cut out. The finished weight, minus motor, is approximately thirty odd kilos depending on the weight of ply, epoxy and glass that you use. The transom is a single piece of ply approximately 20mm in width. Built with these composite materials, it's strong, tough, extremely light and with care will last for years.

SAILS AND SAILING GEAR

All dimensions for the above gear are supplied with the plan and all equipment is available from any local chandlers. The gear required is simple, cheap and easy to build for a first time builder.

WHAT TOOLS WILL I NEED?

Not many. A jigsaw, clamps, an orbital sander, a drill and perhaps an electric planer and a belt sander with a few assorted grade belts would be handy!

Materials - 4 sheets ply for 12'...4.5 sheets for 16'...6 sheets ply for 19'

Plywood sheets 1220mm x 2440mm ply, suitable for boatbuilding. There are many and various makes and grades and I'll not enter into that can of worms, suffice to say that with the use of epoxy composites you will not be restricted necessarily to 'marine ply'.

1 piece 15mm ply 3' x 6'.

Approximately 6 metres 300gm bi-axial fibreglass cloth.

12 litres Epoxy resin.

Q-Cells or Microspheres.

Various assorted widths of Hoop Pine or Meranti 40mm x 10mm for rubbing strakes.

1 roll of glass tape, approximately 4" wide.

Copper wire or electrical ties.

Several polystyrene fruit boxes.

Twenty or thirty 10 x 40 clipboard screws (for temporary holding purposes).

1 litre Epoxy primer.

1 litre gloss enamel.

Several long, thin battens for curves, approximately 15'

Materials required for the sails and sailing gear will be listed in the plans and can be varied if required upon advice from your rigger or sail maker.

The price of the plans can be found on the website listed below.
NOTE: IF YOU WOULD LIKE TO SEE SOME PICTURES THAT ACCOMPANY THIS ARTICLE GO TO
http://www.dolphinboatplans.com

How to Build Your Own Boat
Sander Orbital

Cyber Monday PORTER-CABLE 382 5-Inch Random Orbit Sander 2011 Deals

Dec 02, 2011 17:50:52

Cyber Monday PORTER-CABLE  382 5-Inch Random Orbit Sander Deals
Click for larger image and other views

PORTER-CABLE  382 5-Inch Random Orbit Sander

>> Click here to update Cyber Monday prices for PORTER-CABLE 382 5-Inch Random Orbit Sander <<

Cyber Monday PORTER-CABLE 382 5-Inch Random Orbit Sander Feature

  • Provides maximum sanding speed for smooth finishes
  • Controlled finishing system maintains controllable pad speed and minimizes gouging during start up
  • Dual-plane counter-balanced fan reduces user fatigue
  • Dust-sealed switch protects against dust ingestion for longer switch life
  • Sealed 100 percent ball-bearing construction


Cyber Monday PORTER-CABLE 382 5-Inch Random Orbit Sander Overview

Porter Cable 5'' random orbit sander provides maximum sanding speed for smooth finishes. Controlled finishing system maintains controllable pad speed and minimized gouging during start up. Dual plane counter balanced fan reduces user fatigue. Dust sealed switch protects against dust ingestion for longer switch life. Sealed 100% ball bearing construction. Accepts 5'', 8 hole hook and loop paper.



SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday PORTER-CABLE 382 5-Inch Random Orbit Sander ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

PORTER-CABLE  382 5-Inch Random Orbit Sander

Limited Offer Today!! PORTER-CABLE 382 5-Inch Random Orbit Sander Cyber Monday and Black Friday 2011 Deals

40 Samsung Lcd 1080P 120Hz Hdtv

PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander

Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander 2011 Deals

Dec 01, 2011 18:43:57

Cyber Monday PORTER-CABLE  380 1/4 Sheet Orbital Finish Sander Deals
Click for larger image and other views

PORTER-CABLE  380 1/4 Sheet Orbital Finish Sander

>> Click here to update Cyber Monday prices for PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander <<

Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander Feature

  • 2.0 Amp motor moves at 13,500 opm, providing a superior finish
  • Dual plane, counter-balanced low-vribation design reduces user fatigue
  • Dust-Sealed switch protects against dust ingestion for longer switch life
  • Less aggressive material removal than RO sanders
  • Sanding into corners


Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander Overview

2.0 Amp motor moves at 13,500 opm, providing a superior finish. Dual plane, counter-balanced low-vribation design reduces user fatigue. Dust-Sealed switch protects against dust ingestion for longer switch life. Less aggressive material removal than RO sanders. Sanding into corners.



SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

PORTER-CABLE  380 1/4 Sheet Orbital Finish Sander

Limited Offer Today!! PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander Cyber Monday and Black Friday 2011 Deals

Cordless Angle Grinder

Restoring and Refinishing Teak Furniture

Teak furniture pieces are some of the most valued members of the outdoor furniture world. Teak's natural consistency and oils allow teak furniture to undergo hardly any damage or changes due to extreme moisture or sunlight. Teak is a wood, so it is prone to changes in color over time.

Sander Orbital

The good news for teak furniture owners and prospective owners is that it can be restored and has the potential to look like brand new furniture no matter how old it is. Vintage furniture buyers can also breathe a sigh of relief because it is possible to turn an old piece of furniture into nearly brand new. Because of the Danish Modern style made popular in the 50s and 60s, teak furniture has become an icon in vintage furniture.

Sander Orbital

The grayish color of weathered teak is beautiful to some while others prefer the original bright honey color of new teak. It is easy to restore and refinish teak furniture back to its original color without leaving any damage to the piece.

The first thing you will need to do is wash the teak furniture gently with teak-specific soap. These soaps can be found at a local hardware or home improvement store. Washing is done before sanding because removing all of the dust and dirt first will prevent problems during sanding. Before any of the next steps are executed, the teak furniture should be completely dried.

The next step, sanding the teak furniture, is the most difficult step of the entire process. Sand the dried piece of furniture lightly until the natural honey-color of the wood begins to shine through. Never sand too hard and you should always be sanding in the same direction of the grain on the wood. Tools you will need for this process are fine grain sand paper, an orbital sander, gloves, and goggles. A cloth underneath the furniture can also be put down to reduce the cleanup time after sanding is complete. All sections of the furniture should be sanded evenly and no gray should be showing before continuing on to the next step.

Now you will need to wipe down the furniture with a cloth very carefully to remove all dust particles present from the sanding step. Extra care is needed right after it has been sanded if you do not plan on applying oil right away and stains are very likely during this stage if the furniture is not oiled right away.

The teak furniture should be completely clean and dry before applying oil. Teak oil will need to be purchased to restore the natural oils already found in the teak. The teak oil should be applied with a soft cloth or brush and done one coat at a time with drying time in between. The teak oil will take very easily and be absorbed into the furniture when applied. The natural honey color will quickly begin to shine. The furniture should be left to dry and soak up all of the oils before re-applying more coats.

The teak furniture will eventually stop absorbing the teak oil, which is your sign to stop applying the oil. After all of the oil is absorbed and everything is dry, you should apply teak-specific sealant to protect the oil from disappearing due to the elements. These sealants will be easy to find in your local hardware or home improvement store.

Restoring and Refinishing Teak Furniture
Sander Orbital

Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander 2011 Deals

Nov 30, 2011 21:32:35

Cyber Monday PORTER-CABLE  380 1/4 Sheet Orbital Finish Sander Deals
Click for larger image and other views

PORTER-CABLE  380 1/4 Sheet Orbital Finish Sander

>> Click here to update Cyber Monday prices for PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander <<

Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander Feature

  • 2.0 Amp motor moves at 13,500 opm, providing a superior finish
  • Dual plane, counter-balanced low-vribation design reduces user fatigue
  • Dust-Sealed switch protects against dust ingestion for longer switch life
  • Less aggressive material removal than RO sanders
  • Sanding into corners


Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander Overview

2.0 Amp motor moves at 13,500 opm, providing a superior finish. Dual plane, counter-balanced low-vribation design reduces user fatigue. Dust-Sealed switch protects against dust ingestion for longer switch life. Less aggressive material removal than RO sanders. Sanding into corners.



SAVE NOW on Cyber Monday offers below!

Available In Stock.

This Cyber Monday PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

PORTER-CABLE  380 1/4 Sheet Orbital Finish Sander

Limited Offer Today!! PORTER-CABLE 380 1/4 Sheet Orbital Finish Sander Cyber Monday and Black Friday 2011 Deals

Stereo Shelf System Vizio Led Televisions Protein Drink